Plenty P2D Co.,Ltd. (Oiles Bush, Aurotek Controller, Panasonic)

Language

Font Size : A A A

หน้าหลัก

เกี่ยวกับเรา

ติดต่อเรา

แผนที่

ดาวน์โหลด

สมัครงาน

Roller slider system with radial ball bearing rollers

COMPACT RAIL features inductively hardened rails. This system is recommended for high processing speeds, long service life specifications, and noiseless running.

Three rail types, T, K and U profiles, with fixed or loose bearings (T+U or K+U), compensate for production tolerances, e.g. for machine housing
Compact dimensions thanks to internal raceways
Two slider types, N-series with aluminium diecast bodies, C-series with steel bodies
Lifetime lubrication
Insensitive to dirt
Suitable for processing speeds up to 9 m/s
Sizes 18, 28, 43, 63mm rail widths

Adjustable preload

Slider Types and Styles | Series 18 | Series 28 | Series 43 | Series 63

This linear motion guide-rail system is an easy, precision roller bearing solution that allows for rail mis-alignment in both out-of-parallel and out-of-plane conditions. With the large rolling elements used inside the ROLLON COMPACT RAIL sliders, dirt and contamination are less of a problem than with that of recirculating-ball carriages. Since the COMPACT RAIL sliders run on an induction heat treated steel surface, they are able to move very fast, very quite, and with an extremely low coefficient of friction. The standard "NTE" style slider has a full body lateral seal, spring energized scrapers, and a felt wick reservoir at each end for complete self-lubrication. The easy preload setting for every COMPACT RAIL slider can be set according to the exact needs of the application so as to maintain stiffness and a low coefficient of friction.

QUICK AND EASY ASSEMBLY

The ROLLON COMPACT RAIL linear guide-way has been engineered to allow for a substantial cost savings gained from the ease of mounting, while maintaining precision linear movements. With the choice between two types of master guide rails in parallel with the "U" follower rail, the COMPACT RAIL system is compliant with assembly mis-alignment.

GUIDE-RAILS

The ROLLON COMPACT RAIL linear guide-way system utilizes induction hardened raceways inside a single piece of carbon bearing steel rail. The standard rail is coated with an electrolytic zinc-plating for corrosion protection. For mounting flexibility each of the rail choices offer counter-sunk OR counter-bored mounting holes. The "T" style master guide-rail offers optimum lateral stability for the Compact sliders. The "K" style master guide-rail offers the ability for the Compact sliders to pivot +/- 2 degrees to comply with a less than square match up between the saddle and the rail mounting surface. The "U" style guide-rail with its flat profiled raceways allows the Compact sliders to follow one of the Master rails within 4mm out of parallel as well as out of plane.

COMPACT GUIDE-RAIL SERIES

Each of the guide-rail series is known by the dimension across the back of the rail mounting surface:

18, 18mm or .71" for the mating mounting surface dimension
28, 28mm or 1.10" for the mating mounting surface dimension
43, 43mm or 1.69" for the mating mounting surface dimension
63, 63mm or 2.43" for the mating mounting surface dimension

	Download Rollon catalog


NTE This compact slider body has 3 precision rollers running on opposed surfaces, the adjustable center roller sets the preload for the slider. This cast aluminum body has steel inserts for mounting, lateral seals, spring energized scrapers, and a felt wick reservoir good for 2 million cycles between lubrication intervals.

NTE..L This extended compact slider body has the engineered flexibility to use 3, 4, or 5 precision rollers running on opposed surfaces, the adjustable rollers set the preload for the slider. This cast aluminum body has steel inserts for mounting, lateral seals, spring energized scrapers, and a felt wick reservoir good for 2 million cycles between lubrication intervals.

CSW This steel slider body has the engineered flexibility to use 3, 4, 5 , or 6 precision rollers running on opposed surfaces, the adjustable rollers set the preload for the slider. The tapped mounting holes are 180 degrees from the rail mounting holes. The modified polyamide wipers serve as very aggressive scrappers for dirt and debris.

CDW This steel slider body has the engineered flexibility to use 3, 4, 5 , or 6 precision rollers running on opposed surfaces, the adjustable rollers set the preload for the slider. The tapped mounting holes are 90 degrees from the rail mounting holes and can be accessed from the top or bottom. The modified polyamide wipers serve as very aggressive scrappers for dirt and debris.